How to Launch CyberPanel on GoDaddy?

8 minutes read

To launch CyberPanel on GoDaddy, you need to follow a series of steps:

  1. Log in to your GoDaddy account and navigate to the cPanel of your hosting account.
  2. Search for the "CyberPanel" option within the cPanel and click on it.
  3. You will be redirected to a CyberPanel installation page. Click on the "Install CyberPanel" button to proceed.
  4. Next, you will be asked to choose between a Minimal or Full installation. Select the appropriate option based on your requirements and click "Install".
  5. The installation process may take some time. Once it is complete, you will see a success message indicating that CyberPanel has been installed successfully.
  6. To access your CyberPanel dashboard, click on the "Access CyberPanel" button or use the provided URL in your web browser.
  7. You will be prompted to enter the username and password to log in to the CyberPanel dashboard. Use the credentials you specified during the installation process.
  8. After logging in, you will have access to the CyberPanel dashboard, where you can manage your websites, domains, emails, databases, and other settings.


Please note that these steps may vary slightly depending on the version of CyberPanel and the GoDaddy hosting plan you have. It is always recommended to refer to the official documentation or contact GoDaddy support if you encounter any issues during the installation process.

Exceptional Cloud Hosting Providers in 2024

1
DigitalOcean

Rating is 5 out of 5

DigitalOcean

2
AWS

Rating is 5 out of 5

AWS

3
Vultr

Rating is 4.8 out of 5

Vultr

4
Cloudways

Rating is 4.7 out of 5

Cloudways


What is the default username and password for CyberPanel on GoDaddy?

The default username for CyberPanel on GoDaddy is admin, and the default password is the same as your GoDaddy account password.


What is the command-line interface for CyberPanel on GoDaddy?

The command-line interface (CLI) for CyberPanel on GoDaddy can be accessed via SSH. Here are the steps to access the CLI:

  1. Log in to your GoDaddy account and go to the "Web Hosting" section.
  2. Find the website hosting with CyberPanel that you want to access and click on the "Manage" button.
  3. In the hosting dashboard, look for the "Advanced" section and click on the "SSH Access" option.
  4. If SSH access is disabled, you need to enable it. Click on the "Enable" button and follow the prompts to enable SSH.
  5. Once SSH is enabled, you will see the SSH details including the hostname, username, and port number.
  6. Open a terminal on your local computer and use the SSH command to connect to the server. Here's an example command:
1
ssh [username]@[hostname] -p [port]


Replace [username] with your SSH username, [hostname] with your server's hostname, and [port] with the SSH port number provided by GoDaddy.

  1. You will be prompted to enter the SSH password for your CyberPanel hosting account. Enter the password and press Enter.
  2. After successful authentication, you will be logged in to the server via SSH and can use the CLI to manage your CyberPanel installation.


Note: It is important to exercise caution when using the CLI as certain commands can have a significant impact on your web hosting account.


How to manage FTP accounts using CyberPanel on GoDaddy?

To manage FTP accounts using CyberPanel on GoDaddy, you can follow these steps:

  1. Log in to your CyberPanel control panel on GoDaddy.
  2. Once logged in, you will see the CyberPanel dashboard. Click on the "Websites" button in the left-hand sidebar.
  3. Select the website for which you want to manage FTP accounts.
  4. Scroll down to the "FTP Access" section and click on the "Manage FTP Accounts" button.
  5. On the FTP Accounts page, you will see a list of existing FTP accounts. To add a new account, click on the "Create FTP Account" button.
  6. Fill in the required details for the new FTP account, including the Username, Password, and Directory. You can also choose the permission level for the account (Read-Only, Full).
  7. Once you have entered the details, click on the "Create" button to create the FTP account.
  8. The newly created FTP account will now be listed on the FTP Accounts page. From here, you can edit or delete existing accounts if needed.


That's it! You have now successfully managed FTP accounts using CyberPanel on GoDaddy.


How to install CyberPanel on GoDaddy?

To install CyberPanel on GoDaddy, follow these steps:

  1. Log in to your GoDaddy account and go to the cPanel Dashboard.
  2. Scroll down to the "Software" section and click on "Softaculous Apps Installer".
  3. In Softaculous, search for "CyberPanel" in the search bar.
  4. Click on the CyberPanel icon and then click on the "Install" button.
  5. Choose the domain where you want to install CyberPanel. You can select "https://" if you have an SSL certificate, or "http://" if you don't.
  6. Enter the desired username and password for the CyberPanel admin account.
  7. Leave the database and table prefix as default, or change them if required.
  8. Click on the "Install" button to initiate the installation. Wait for the process to complete.
  9. Once the installation is finished, you will see a success message with the details of the installation.
  10. You can now access your CyberPanel admin dashboard by visiting the URL:
  • http://yourdomain.com:8090 (replace "yourdomain.com" with your actual domain name)
  1. Log in with the admin username and password you set during installation.


That's it! You have successfully installed CyberPanel on GoDaddy and you can now start using it for managing your websites and server.


How to create a database on CyberPanel using GoDaddy?

To create a database on CyberPanel using GoDaddy, you need to follow these steps:

  1. Log in to your CyberPanel control panel. You can access it by appending ":8090" to your domain name or server IP address (e.g., http://yourdomain.com:8090).
  2. Once logged in, click on the "Websites" tab in the sidebar menu.
  3. Locate the website to which you want to add the database and click on the "Manage" button next to it.
  4. In the website management dashboard, scroll down and click on the "Databases" icon.
  5. Select "MySQL Databases" from the dropdown menu.
  6. On the MySQL Databases page, click on the "Create Database" button.
  7. Enter a name for your database and click on the "Create" button. Make sure to note down the database name, as you'll need it for further configuration.
  8. Once the database is created, go to the "Manage Databases" section and click on the "Manage" button next to the newly created database.
  9. On the next page, click on the "Access Hosts" tab.
  10. Click on the "Add Access Host" button to whitelist your GoDaddy server IP address.
  11. Enter your GoDaddy server IP address in the "Host/IP" field and click on the "Add" button.
  12. You have now successfully created a database on CyberPanel using GoDaddy. You can use database management tools like PHPMyAdmin or connect to the database using your preferred programming language to configure and manage it.


Remember to update your web application's configuration files with the correct database credentials (username, password, and database name) to establish a connection with the newly created database.


Note: These steps may slightly vary depending on the version of CyberPanel you are using.

Facebook Twitter LinkedIn Telegram Whatsapp Pocket

Related Posts:

To run Gatsby on GoDaddy, you need to follow these steps:Login to your GoDaddy account: Go to the GoDaddy website and login using your credentials.Set up a new hosting plan: If you don't have a hosting plan, you need to set it up. Go to the hosting section...
When considering where to host CyberPanel, there are multiple options available. Here are some factors to consider when making a decision:Cloud hosting: Hosting CyberPanel on a cloud-based platform like Amazon Web Services (AWS), Google Cloud Platform, or Micr...
To install CyberPanel on A2 Hosting, you can follow these steps:Log in to your A2 Hosting account and navigate to the cPanel dashboard. In the cPanel dashboard, scroll down to the "Software" section and click on the "Select PHP Version" option....